Filter By:
- Hardtail (51)
- Full-Suspension (126)
- 29-Inch Wheel (29ers) (150)
- Downhill (4)
- Rigid (13)
- Dirt Jump (6)
- Mountain Frames (47)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Bikes
$4,499.00
The Exie USA is a World-Cup capable cross-country race bike that flat out shreds. With a sub 2,000g frame weight and dw-link suspension, it offers a stunning combination of pedaling efficiency and downhill performance. We designed, built, and tested it in our Santa Cruz factory, which is powered by the warm California sunshine.
$4,099.00
The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks.
IT'S METAL
Over our long tenure from mountain biking's awkward adolescence to its current anything-shreddy era, we've experimented with steel, aluminum and titanium—remember the Bow-Ti, the first superbike? We remember the metal times too, and it feels good to offer a premium ride experience to our broadening family of riders, courtesy of durable, affordable aluminum alloy.
MODERN GEOMETRY
With a steep, 76-degree seat tube angle and a rangy but not stratospheric reach, the Ripmo AF places riders centrally and upright over the bottom bracket. It makes for an efficient position that can go the long haul without placing too much weight on its slack, 64.9-degree headtube angle. A 44mm reduced-offset fork is more surefooted on steep descents and steadies high speeds. Better up, better down.
DW LINK
Since 2005, we've partnered with suspension guru Dave Weagle on the dw-link suspension platform. It provides an unparalleled combination of climbing efficiency and downhill performance, which has been proven repeatedly at the highest levels of racing.
AIR & COIL COMPATIBLE
The Ripmo AF is compatible with both coil and air shocks due to a more progressive leverage rate. It allows for coil's linearity to thrive and we spec air shocks with tunes that provide pop without feeling too harsh. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
2.6" TIRE CLEARANCE
Ibis helped pioneer the wide rim revolution, which inspired the new crop of wider 2.4"-2.6" tires. When paired together, this combo can be run at ultra-low pressures which results in elbow-dragging cornering traction without sacrificing straight line speed.
PICK YOUR SIZE
We use words like small, medium, and large to describe our sizing because it's easy to understand, but our ultra-low standovers give you the ability to size your frame based on reach and preference.
LONG DROPPER POST
What's better than a dropper post? A longer one. Our frames are designed to accommodate the longest dropper posts possible. Riders over 5'8 (or 173cm) can easily run a 185mm dropper post, while folks between 5' and 5'8 (152cm-172cm) can use a post 125mm or longer depending on inseam length.
REMOVABLE ISCG05 MOUNT
Our optional ISCG 05 mount is there if you want it, removable if you don't.
SEVEN YEAR WARRANTY
We stand behind our products. If it's our fault, we'll fix it. Our aluminum frames are backed by the same 7 year warranty and excellent customer service as our carbon products.
- Image is representational and may differ from build spec
$950.00
A summer blockbuster with an eye for adventure, the Rockhopper Comp lives for high action and fast-paced plot twists. It features an all-new, Premium A1 Aluminum frame making its singletrack debut.
Roll the credits to discover an SR SunTour XCM fork with a custom two-way damping circuit, Stout wheelset, Tektro hydraulic stoppers, and Shimano's wide-range 1x10 drivetrain. You have backup provided by a supporting cast that's all thriller and no filler but it will never leave you hanging.
Details:
- A heart of gold, presented in our lightweight yet durable Premium A1 Aluminum, the Rockhopper's butted aluminum frame features hydroformed top and downtubes to keep weight low and strength high, all while providing increased standover clearance, slick internal cable routing, and dropper-post compatibility.
- To ensure that the Rockhopper offers both the best fit and best performance for every person, no matter their measure, we've paired each Rockhopper frame size with the optimal wheel size. The result is a Rockhopper to fit every rider and the assurance that every Rockhopper is rolling on the best-handling wheel for its frame size.
- Bringing our Rx Tune to Rockhopper for the very first time, the lockout-equipped SR Suntour XCM with custom Multi-Circuit damping brings size-specific travel and spring rates to the show in a performance that's sure to impress while also ensuring consistent geometry, handling, and suspension performance, regardless of frame or wheel size.
- Beautifully beastly, Tektro hydraulic disc brakes pack a mean bite but deliver their power with a refined, intuitive feel to make for a package that punches way above its pay grade.
- Keep things simple with a durable 1x Shimano drivetrain with plenty of range and a clutch-equipped rear derailleur that keeps your ride quiet—and your chain on.
- Pair dead-reliable hubs from Formula with our 25-millimeter internal diameter, hookless Stout rims for a strong, light, and durable wheelset hat trick.
$5,999.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Contessa Spark 910. Why, you ask? Well, beyond the fact that it is fast, lightweight and ultra capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike.
KEY FEATURES
- Spark Carbon HMF-Alloy Frame
- FOX 34 Float Perf. 130mm Fork
- FOX Nude 5T EVOL, TwinLoc, 120mm
- SRAM GX Eagle AXS Transmission
- SRAM DB8 4 Piston Disc Brakes
- Syncros Silverton 2.5 TR Wheels
- Schwalbe Wicked Will Tires
- Syncros Dropper Post and Parts
$6,499.99
Our Spark ST line of bikes takes a classic Spark 900 vibe and adds suspension components for those aiming to spend a bit more time losing elevation. Now with a custom Float x NUDE from FOX, this short travel trail bike is as capable as ever.
KEY FEATURES
- Spark ST Carbon HMF Frame
- FOX 34 P. Elite Grip2 140mm Fork
- FOX FLOAT X Nude, TracLoc, 120mm
- SRAM GX Eagle AXS Transmission
- Shimano SLX 4 Piston Disc Brakes
- Syncros Silverton 2.5 TR Wheels
- Maxxis Dissector Tires
- Syncros Dropper Post and CF Parts
$7,299.99
Made to go up the mountain in a hurry, and down the mountain even faster. The all new Genius ST features a custom Float X Nude shock from FOX and is the perfect bike for those who have an insatiable hunger for rippin' trail.
KEY FEATURES
- Genius Carbon HMF-Alloy Frame
- FOX 36 P. Elite Grip2 160mm
- FOX FLOAT X Nude, TracLoc, 150mm
- SRAM GX Eagle AXS Transmission
- Shimano XT 4 Piston Disc Brakes
- Syncros Revelstoke 2.0 TR Wheels
- Maxxis Foldable Tires
- Syncros Dropper Post, Syncros CF Parts
$5,899.00
What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2S. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
GEOMETRY
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works — all day up, all day down, all day in between.
REVISED SWINGARM
The Ripmo V2S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops.
COIL COMPATIBLE
The Ripmo V2S is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
DROPPER POST CLEARANCE
Mo’ dropper, mo’ better. On small frames, you can run 125?–?150mm, pending your preference and inseam length. Our shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
TIRE CLEARANCE
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you’re not limited by width.
BUSHINGS
Tired of hitting ?“purchase” on another set of bearings each season? So were we. That’s why we use bushings where they make sense, and bearings where they don’t. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We believe so strongly in them, we back them with a free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance—no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside, should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
REMOVABLE ISCG MOUNT
So, you’re too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
- Image is representational and may differ from build spec
$3,999.00
The DV9 is back! A do-it-all carbon fiber hardtail designed to take you from the trailhead to the starting line, with a session at the pump track in between. Lighter weight, with up to date geometry, and engineered to the same exacting standards as the rest of our line, it packs a ton of performance in a more accessible price.
$4,099.00
The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks.
IT'S METAL
Over our long tenure from mountain biking's awkward adolescence to its current anything-shreddy era, we've experimented with steel, aluminum and titanium—remember the Bow-Ti, the first superbike? We remember the metal times too, and it feels good to offer a premium ride experience to our broadening family of riders, courtesy of durable, affordable aluminum alloy.
MODERN GEOMETRY
With a steep, 76-degree seat tube angle and a rangy but not stratospheric reach, the Ripmo AF places riders centrally and upright over the bottom bracket. It makes for an efficient position that can go the long haul without placing too much weight on its slack, 64.9-degree headtube angle. A 44mm reduced-offset fork is more surefooted on steep descents and steadies high speeds. Better up, better down.
DW LINK
Since 2005, we've partnered with suspension guru Dave Weagle on the dw-link suspension platform. It provides an unparalleled combination of climbing efficiency and downhill performance, which has been proven repeatedly at the highest levels of racing.
AIR & COIL COMPATIBLE
The Ripmo AF is compatible with both coil and air shocks due to a more progressive leverage rate. It allows for coil's linearity to thrive and we spec air shocks with tunes that provide pop without feeling too harsh. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
2.6" TIRE CLEARANCE
Ibis helped pioneer the wide rim revolution, which inspired the new crop of wider 2.4"-2.6" tires. When paired together, this combo can be run at ultra-low pressures which results in elbow-dragging cornering traction without sacrificing straight line speed.
PICK YOUR SIZE
We use words like small, medium, and large to describe our sizing because it's easy to understand, but our ultra-low standovers give you the ability to size your frame based on reach and preference.
LONG DROPPER POST
What's better than a dropper post? A longer one. Our frames are designed to accommodate the longest dropper posts possible. Riders over 5'8 (or 173cm) can easily run a 185mm dropper post, while folks between 5' and 5'8 (152cm-172cm) can use a post 125mm or longer depending on inseam length.
REMOVABLE ISCG05 MOUNT
Our optional ISCG 05 mount is there if you want it, removable if you don't.
SEVEN YEAR WARRANTY
We stand behind our products. If it's our fault, we'll fix it. Our aluminum frames are backed by the same 7 year warranty and excellent customer service as our carbon products.
- Image is representational and may differ from build spec
$8,698.00
What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that's exactly what we did for the Ripmo V2S. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides.
GEOMETRY
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn't wander while climbing, and doesn't hold you back descending. It works - all day up, all day down, all day in between.
REVISED SWINGARM
The Ripmo V2S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high-speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops.
COIL COMPATIBLE
The Ripmo V2S is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
DROPPER POST CLEARANCE
Mo' dropper, mo' better. On small frames, you can run 125 - 150mm, pending your preference and inseam length. Our shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
TIRE CLEARANCE
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you're not limited by width.
BUSHINGS
Tired of hitting "purchase" on another set of bearings each season? So were we. That's why we use bushings where they make sense, and bearings where they don't. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We believe so strongly in them, we back them with a free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance - no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside, should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
REMOVABLE ISCG MOUNT
So, you're too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
$3,599.00
What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2S. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
GEOMETRY
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works — all day up, all day down, all day in between.
REVISED SWINGARM
The Ripmo V2S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops.
COIL COMPATIBLE
The Ripmo V2S is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
DROPPER POST CLEARANCE
Mo’ dropper, mo’ better. On small frames, you can run 125?–?150mm, pending your preference and inseam length. Our shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
TIRE CLEARANCE
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you’re not limited by width.
BUSHINGS
Tired of hitting ?“purchase” on another set of bearings each season? So were we. That’s why we use bushings where they make sense, and bearings where they don’t. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We believe so strongly in them, we back them with a free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance?—?no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside, should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
REMOVABLE ISCG MOUNT
So, you’re too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
- Image is representational and may differ from build spec
$1,350.00 - $1,800.00
The all-new Chisel has been purpose-built to tackle modern cross country trails and race courses with the utmost speed. In fact, it shares many of the same modern features as its Epic Hardtail sibling, but in a more budget-friendly package—making it the most efficient and capable alloy hardtail out there.
This Chisel comes spec'd with SRAM's tried and true SX Eagle 1x12 speed drivetrain and Level T hydraulic disc brakes, a RockShox Judy Silver fork, and 25mm internal width alloy wheels wrapped in 2.35 Fast Track Control casing tires.
- The Chisel's all-new frame utilizes our D'Aluisio Smartweld technology that moves the hydroformed tube joints away from the areas of the highest stress, making the finished frame's balance of strength, rigidity, and weight more pronounced than any alloy frame in history. This not only makes the Chisel one of the lightest alloy hardtail frames out there at 1,350g, but it also allows for tuned frame stiffness across all sizes.
- The new Chisel also houses all of the modern features that you expect from an XC bike, like Progressive XC Geometry with a 68-degree headtube angle and longer reach, internal cable routing, a threaded bottom bracket, boost spacing, 30.9mm dropper post compatibility, and 1x-only drivetrains.
$4,999.99
KEY FEATURES
- Spark RC Carbon HMF Frame
- FOX 34 SC Float Perf. 120mm Fork
- FOX Nude 5 EVOL, 120mm, TwinLoc
- Shimano XT 12 Speed
- Shimano XT Disc Brakes
- Maxxis Rekon Race Foldable Tires
The Spark RC Team is the perfect blend of top-notch carbon engineering, never before seen levels of integration and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride.
Please note that bike specifications are subject to change without prior notice.
$1,999.99
KEY FEATURES:
- Scale Carbon HMF Frame
- RockShox Judy 100mm Fork
- RideLoc 2 Remote
- SRAM NX-SX Eagle 12 Speed
- Shimano Disc Brakes
- Schwalbe Smart Sam Tires
Balancing the ALL-NEW Scale's DNA, we've created a whole new breed in the world of hardtail mountain bikes. A racing inspired geometry, coupled with a straightforward and sharp design provides the all-new Scale 900 line with its distinctive character and aggressive look—a bike that proudly flaunts its definitive characteristics. This rig is ready for just about anything, are you?
TECHNOLOGIES:
ADJUSTABLE HEAD ANGLE
With the new Scale RC, you can adjust the head angle by 0.6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble.
DESIGN
The new Scale’s design was uncompromisingly subjected to our pursuit of perfection and drive for pure efficiency, strictly following the guiding principle of "Form follows Function". In our search for the ultimate, yet most simple construction, we’ve centered the design around the essentials by balancing the bike’s DNA in order to create a whole new breed of XC bike. The result is a straightforward and clear design, which provides the all-new Scale with its distinctive character and aggressive look: a bike that proudly shows off its characteristics.
HOLLOW DROPOUT CONSTRUCTION
The dropout features an advanced, hollow construction, which allows the axle head to clamp against the inner surface of the dropout and leaves the head flush with the surface. This enables the lightest possible construction approach and a clean-looking design from the outside. While being able to directly shave off 7.5g with the new dropout construction, the optimized design favors a narrower construction of the rear triangle area, which in turn enables a reduction of 20g in this area of the frame (HMX-SL).
MONOCOQUE CONSTRUCTION
The new Scale RC’s monocoque construction enables production using only one mold for the main section of the bike, the front triangle. Applying our carbon expertise, the new Scale, therefore, consists of only 3 separate pieces molded together. This directly translates into an increased level of efficiency due to the reduced number of junctions required therefore decreasing weight while keeping superior stiffness – something we’re always aiming for with hardtail race bikes. With the full frame constructed as a system, the monocoque design enables the frame to handle forces as a whole.
SERVICE DOOR
A little service door, which is accessible through a downtube cover, allows easy access to the interior of the frame without the need to remove the Bottom Bracket. Frame maintenance is made easy with regards to cable routing.
Prepare for launch with the RKT 9 RDO RS, our original carbon fiber cross-country bike. With a 100mm suspension fork and 90mm of highly efficient, patented CVA suspension travel, this singletrack missile is made for race-day missions and lofty podium landings.
$3,700.00
$4,800.00 - $6,199.99
Up to 40% Off
Looking for a bike that ratchets up the fun factor but doesn't bite back when there's work to be done? Our playful JET 9 RDO is the ticket. With Niner's [R]evolution geometry and 120mm of suspension travel, you'll float up technical climbs, blast downhills, and fly smoothly over everything else.
$4,999.99
The Ransom. This Enduro Mountain Bike features 170mm of trail munchin', climb-crushing, stage-winning all-day pinning mountain biking excellence. The 920 comes equipped with a FOX 38 fork, our TracLoc Suspension System, a SRAM Eagle groupset, and Syncros components to help you get away with murder, regardless of your ability level.
NUDE SUSPENSION TECHNOLOGY
Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer.
RANSOM PROTECTION
Protecting the Ransom's frame was an integral part of the project. We've integrated a clever DT protector under the BB and along the downtube, and have also implemented a newly developed, noise-silencing Chainstay/seatstay protector. A quiet ride is a fast ride.
$1,399.99
KEY FEATURES:
- Scale Alloy 6061 Frame QR
- RockShox Judy 100mm Fork
- RockShox PopLoc Remote
- SRAM NX-SX 12 Speed
- Shimano Disc Brakes
- Maxxis Rekon Race Tires
Balancing the ALL-NEW Scale's DNA, we've created a whole new breed in the world of hardtail mountain bikes. A racing-inspired geometry, coupled with a straightforward and sharp design provides the all-new Scale 900 line with its distinctive character and aggressive look, a bike that proudly flaunts its definitive characteristics. This rig is ready for just about anything, are you?
$8,698.00
What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that's exactly what we did for the Ripmo V2S. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides.
GEOMETRY
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn't wander while climbing, and doesn't hold you back descending. It works - all day up, all day down, all day in between.
REVISED SWINGARM
The Ripmo V2S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high-speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops.
COIL COMPATIBLE
The Ripmo V2S is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
DROPPER POST CLEARANCE
Mo' dropper, mo' better. On small frames, you can run 125 - 150mm, pending your preference and inseam length. Our shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
TIRE CLEARANCE
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you're not limited by width.
BUSHINGS
Tired of hitting "purchase" on another set of bearings each season? So were we. That's why we use bushings where they make sense, and bearings where they don't. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We believe so strongly in them, we back them with a free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance - no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside, should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
REMOVABLE ISCG MOUNT
So, you're too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
- Image is representational and may differ from build spec
$3,999.00
The Ripley AF is our beloved, category-defying, short-travel, singletrack-scorching Ripley - rendered in aluminum, with more aggressive geometry. All the sizzle and pop of the carbon Ripley, now available as a complete bike at a wallet friendly price.
$7,000.00
THINK FASTEST: The Epic World Cup is the fastest XC race bike in the world on smooth to moderately technical courses thanks to its unmatched combination of efficiency, control, and lightweight. World Champ Christopher Blevins said it best, "This thing gives me everything I could want from a hardtail, plus the control and capability of full suspension". All it took to create this speed machine was a totally integrated development approach, inventing a radical new shock, and four decades of off-road winning experience.
FRAME OF REFERENCE: To deliver maximum speed through ruthlessly efficient power transfer and precision handling, our engineering team set and achieved new standards in torsional rigidity and BB stiffness. This feat required an integrated development approach that merged a structurally superior double diamond layout with its shock cradled inside the top tube and finished off with the most sophisticated composite layup in Specialized history.
SHOCKINGLY FAST: The Specialized Ride Dynamics team conceived of and invented a revolutionary shock technology for the Epic World Cup that gives the rider the efficiency and snappy response of a hardtail PLUS the control, capability, and momentum-carrying of full suspension—all with a simple setup. Co-developed with RockShox, the SID Deluxe WCID shock utilizes a unique independently adjustable positive and negative air springs to deliver the sought-after hardtail "snap", combined with terrain-devouring forgiveness, and the ability to easily personalize set-up for a specific course or tune for rider preference and feel. Set it firm and it rides like a hardtail or open it up and you have a chunk-squashing ripper. But you aren't just limited to "open and closed," the simple nature of its setup allows the rider to set on a spectrum of firm to soft.
PUNCHING ABOVE ITS CATEGORY: The Epic World Cup's 75mm of rear travel delivers control and capability of a much longer travel bike. Because it's designed to be ridden at or close to topped-out, it yields the same positive travel as a 100mm travel bike set up with 25% sag. To further optimize suspension performance, the Specialized Ride Dynamics team tuned the spring-rate to be relatively flat through the mid-stroke to handle the majority of bump forces like a longer travel bike. Due to its large size, the custom Mega Jounce Bumper is an "industry first" and plays a crucial role in smoothly managing bottom-out on the biggest impacts.
HAVE WE LOST OUR MINDS? SORT OF: While the new, and groundbreaking SID Deluxe WCID shock provides the unique blend of support and compliance in the rear, the BRAIN is still alive and well in the fork. Its Position-Sensitive technology allows riders to sag into the fork 15mm for a balanced ride, providing supple small bump compliance and a firm pedaling platform without the need for a remote lockout or levers to flip.
THE WEIGHT IS OVER: With a frame weight of just 1,915 grams (painted with shock and all hardware), the Epic World Cup edges out the lightest of competitors. This translates to faster acceleration, more efficiently climbing, and more agile handling. And all of that adds up to speed. We achieved the featherweight and monster stiffness of the Epic WC by applying what we learned in the development of our Aethos, the lightest production road frame ever made, specifically the advanced composite layup and tube shapes.
- The all-new Epic World Cup frame features Ride Dynamics Developed suspension technology and 75mm of optimized rear wheel travel. Thanks to its shock technology, Epic World Cup delivers unmatched pedal efficiency and is ready for the roughest descents you can throw at it–no lockout switches required.
- SRAM GX transmission builds on what top riders need in shifting performance and robustness, making it perfectly matched for the brutal demands of modern cross-country racing.
- An all-new SID SL BRAIN fork provides 110mm of bump-muting performance while discerning inputs from the ground or rider to provide ultimate efficiency.
- Descending from a long World Cup lineage, hand-built Roval Control carbon wheels feature a modern 29mm internal-width hookless rim–maximizing strength, ride quality, and durability–while keeping weight to a minimum.
$6,799.00
Evolution of a Classic
This latest iteration of the Trail 429 is evidence of our constant quest for peak performance. We’ve broadened its capabilities without sacrificing its legendary sharpness: slackening the head angle just enough, increasing the reach, and introducing a flip-chip to allow fine-tuning of the geometry toward either the rowdy or racy ends of the spectrum.
All-Star Suspension
Is it possible for a bike to be both razor-sharp and butter-smooth? Yes. The Trail 429 is proof. In order to wring every drop of potential out of 120mm, we’ve reworked the already stellar dw-link suspension to provide a more bottomless feel and allow for a greater range of tunability. The Trail 429 combines rocket ship pedaling performance with a plushness that genuinely feels like more travel than the numbers indicate.
Product Details:
- Refined geometry exemplifies the pinnacle of modern race-to-trail performance
- New, more progressive dw-link® prioritizes pedaling efficiency yet still rewards riders with plush, controlled travel
- 120mm rear suspension travel featuring a vertical trunnion mounted high-volume air shock delivers unprecedented comfort and tunability
- Flip chip adjustability allows riders to tailor geometry for either spirited all-round handling or a more progressive and rowdy demeanor
- Hassle-free, full-length, internal cable routing with Pivot’s easy-to-service and ultra-quiet Pivot Cable Port System
- Fits riders between 4’10” and 6’7” with X-Small to X-Large size offerings
- Pivot’s full carbon frame features size-specific ride tuning, leading edge carbon fiber materials, and Pivot’s proprietary hollow core molding technology to ensure that every rider from 4’11” to 6’7” has a bike that feels perfect and performs at the optimum level for their size
- Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame
$8,499.00
UNCOMPROMISING PERFORMANCE
The all-new Mach 4 SL; a podium seeking missile crafted from the ground up as a testament to speed without compromise. designed to win gold and slaughter KOMs, and do so while delivering an otherworldly ride quality, telepathic handling, and a potent blend of acceleration and tractability.
MORE FUN
Not every day is race day. Sometimes our best races are with ourselves, racing itself should have some fun thrown in to buffer the suffering, the Mach 4 SL is as versatile as it is speedy. The World Cup build yields 95mm or 103mm of rear travel, easily adjusted via flip chip. The Trail build, aimed at squeezing as much fun as humanly possible while delivering either 106 or 115mm of rear travel via the Fox Float rear shock.
- XC-Tuned DW-Link™ Suspension
- New XC Adapted Travel-Adjustable Flip-Chip
- Efficient Fox Factory Float DPS Shock on World Cup Builds with 95mm or 103mm Adjustable Travel
- Versatile Fox Factory or Performance Float Shock Options on XC builds with 106mm or 115mm Adjustable Travel
- Lighter, More Durable High-Load Enduro Max bearings
- Size-Specific Carbon Layup Across Size Range
- Low Standover Fits Riders 4'10" to 6' 7"
- Large Water Bottle Clearance on All Sizes
- Pivot's full carbon frames feature size-specific ride tuning, leading edge carbon fiber materials and Pivot's proprietary hollow core molding technology to ensure that every rider from 4'10" to 6'7" has a bike that feels perfect and performs at the optimum level for their size.
- Injection Molded Rubberized Frame Protection
- Full Internal Routing with Pivot Cable Port System
- Pivot Dock Tool System Compatible Under Top Tube and BB
- Simplified Twistloc Suspension Lockout
$7,499.99
$11,500.00
35% Off
The S-Works Stumpjumper EVO is much more than just a trail bike; it's a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy.
In true S-Works fashion, the S-Works Stumpjumper EVO is built to the hilt. A Fox Factory fork and rear shock handle suspension duties, while SRAM Code RSC four-piston brakes scrub speed, and a full SRAM AXS wireless groupset completes this lust-worthy build.
- All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
- The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
- Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
- We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh**t" necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.
$2,199.99
$3,400.00
35% Off
The S-Works Stumpjumper EVO is much more than just a trail bike; it's a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO - get rowdy.
This S-Works Stumpjumper EVO Frame is the perfect canvas to imagine your ultimate ride. Build your totally custom dream bike, make it a reality, and shred happily.
- All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
- Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits rail-sharp cornering and balanced front and rear stiffness at the lightest-possible weight.
- The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
- We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh**t" necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT Bladder, giving you an extra 22oz of water storage, the same size as a small water bottle, hidden in your downtube.
$1,499.00
Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses.
- 6061-T6 alloy frame
- Internally-routed shift, brake and dropper post housing
- 129 mm suspension fork and dropper post
- 1x drivetrain keeps shifting simple with plenty of gear range
- Hydraulic brakes offer confident stopping power
- Compatible with 29" or 27.5 plus wheels and tires
- Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts
$4,899.00
Rustler C SLX is a 27.5 full suspension mountain bike with a focus on maximizing trail fun. A carbon frame, 27.5" wheels, and geometry designed for a lively ride means this is a bike that comes ready to play. Rustler uses a Split Pivot suspension design for 130 mm of rear travel that is supple over small bumps, supportive on bigger hits, and delivers traction when braking, accelerating, and climbing technical terrain so you're less likely to spin out. Rustler also comes with space for a full-size water bottle and a top tube mount that accommodates all manner of ride accessories. Shimano's proven SLX drivetrain and four-piston brakes keep every ride smooth and reliable.
KEY FEATURES:
SPLIT PIVOT® REAR SUSPENSION SYSTEM:
Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction.
ON-BIKE STORAGE:
Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes.
FRAME PROTECTION:
We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.
$3,999.00
Beargrease pairs a race-ready carbon frame with the capability of fat tires for the ultimate groomed-trail machine. Its trail geometry, dropper post, and 27.5" wheels grant you confidence in loose corners and descents and make for an all-season ripper. Frame and fork mounts for extra bottles and cargo make it easier to gear up for your long days out or even overnighters, and the high-performance XT/SLX drivetrain is the icing on the cake. For light-and-quick confidence on any terrain, Beargrease is one of the best carbon fat-tire bikes out there.
$4,099.00
Blackthorn SLX is our 29er all-mountain bike that's perfect when you're not sure what trail has in store, but you know it's going to be steep, gnarly, loose, or all of the above. Progressive geometry comes to life in a 6061-T6 aluminum frame that's built to last. The 140mm rear shock and 160mm fork make for a smooth, balanced, controlled ride when the trail is anything but. Our tried-and-true Split Pivot suspension system delivers superb small-bump compliance, remarkable climbing ability, and limitless traction, even during braking. Shimano's SLX drivetrain and four-piston brakes are exactly the copilots you want when navigating hair-raising rock gardens, high-speed descents, and stiff climbs. Blackthorn SLX is the tool of choice for all-mountain adventures.
$2,649.00
We know you have a "dream build" list hidden away somewhere. Now’s the time to bring it to life on the Blackthorn Aluminum frame. This versatile all-mountain bike frame comes with a RockShox Super Deluxe Select + shock for 140mm of rear travel. Our tried-and-true Split Pivot suspension design offers a supple, supportive ride with incredible pedaling efficiency so you can take on a huge variety of trails. Start with the best all-mountain bike frame out there, hang your favorite components on it, and let it rip.